Download Gennumcorp USB Devices Driver



Click Browse and locate the USB driver folder. (The Google USB Driver is located in androidsdk extras google usbdriver.) Click Next to install the driver. Or, to upgrade an existing Android USB driver on Windows 7 and higher with the new driver: Connect your Android device to your computer's USB port. Below, we are sharing the links to USB drivers for most of the popular Android device manufacturers like Samsung, LG, Sony, Google, HTC, Motorola, Dell, etc. These USB drivers are safe to use as they are from their respective manufacturers. All the links are valid and official. We recommend you to download the latest USB drivers.

*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)

This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.


Device Updater

OS Requirements: Windows Vista/7/8/10

*Used to download updates for GTX, BDX, X4, Livewire, ITSX

Click hereto download the Device Updater.

Make sure all devices are unplugged during the install process.


Livelink Gen-II

Download gennumcorp usb devices driver updater

OS Requirements: Windows Vista/7/8/10

*Datalogging software.

Click hereto download Livelink Gen-II.

Make sure all devices are unplugged during the install process.


Advantage III

OS Requirements: Windows Vista/7/8/10

Click hereto download Advantage III.

Make sure all devices are unplugged during the install process.


Drivers


Windows 32bit drivers click here.

Windows 64bit drivers click here.


Install Instructions


If you installed the SCT device updater before you plugged the device in then this should be easy to fix.

With your device connected:

Open your computers Device Manager.

Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)

If you see this, right click it and select update driver.

A new window should open up and give you the option to either automatically search, or browse for files.

Click browse for files

Navigate to the folder you downloaded, and select “Open”.

If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.

Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.

Update Agent for GT's


How do I update my Bully Dog GT Tuner?


Basic Steps to Update a GT Tuner

1. Run the Update Agent.

2. Connect the Micro SD card to your computer.

3. Choose the vehicle application and let the Agent search.

4. Click the Update button.

5. When the Update is finished, put the Micro SD card in the GT.

6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)


Detailed Steps to Update a GT Tuner

Touch

Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?


To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.


  1. Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
  2. Connect the SD with either the card reader or the GT itself and the USB cable
  3. Highlight the card in the update agent, and select “select device”

4. Select your device (40417, 40420, etc.) then select “download and upgrade”

5. Wait for the download to finish, you will see this message.

6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.





*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)

This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.


Device Updater

OS Requirements: Windows Vista/7/8/10

*Used to download updates for GTX, BDX, X4, Livewire, ITSX

Click hereto download the Device Updater.

Make sure all devices are unplugged during the install process.


Livelink Gen-II

OS Requirements: Windows Vista/7/8/10

*Datalogging software.

Click hereto download Livelink Gen-II.

Make sure all devices are unplugged during the install process.


Advantage III

OS Requirements: Windows Vista/7/8/10

Click hereto download Advantage III.

Make sure all devices are unplugged during the install process.


Drivers


Windows 32bit drivers click here.

Windows 64bit drivers click here.


Install Instructions

Download Gennumcorp Usb Devices Driver Windows 7


If you installed the SCT device updater before you plugged the device in then this should be easy to fix.

With your device connected:

Open your computers Device Manager.

Download Gennumcorp Usb Devices Driver Updater

Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)

If you see this, right click it and select update driver.

Download Gennumcorp Usb Devices Driver Win 7

A new window should open up and give you the option to either automatically search, or browse for files.

Click browse for files

Download Gennumcorp USB Devices Driver

Navigate to the folder you downloaded, and select “Open”.

If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.

Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.

Update Agent for GT's


How do I update my Bully Dog GT Tuner?


Basic Steps to Update a GT Tuner

1. Run the Update Agent.

2. Connect the Micro SD card to your computer.

3. Choose the vehicle application and let the Agent search.

4. Click the Update button.

5. When the Update is finished, put the Micro SD card in the GT.

6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)


Detailed Steps to Update a GT Tuner

Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?


To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.


  1. Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
  2. Connect the SD with either the card reader or the GT itself and the USB cable
  3. Highlight the card in the update agent, and select “select device”

4. Select your device (40417, 40420, etc.) then select “download and upgrade”

5. Wait for the download to finish, you will see this message.

6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.